Product Activation Failed

-->

Product activation failed while trying to activate ESU product key. When you try to activate the product key, you get a message that resembles the following: Error: Product activation failed. The Windows operating system edition or architecture isn't eligible for ESU. Windows 10 Activation failed I have an Inspiron 3542 laptop that I just upgraded to Windows 10. The update completed but now the device is saying Windows 10 needs to be activated. Today, after making no changes, Access 2019 reports that product activation has failed. On the same computer, Office Standard 2019 works fine. It was installed on the same day, using the same variables in the respective configuration (xml) files.

This article describes emerging issues that affect Extended Security Updates (ESU) deployments and the steps to troubleshoot these issues. This information is organized by task, as follows:

  • Installing update prerequisites
  • Installing ESU keys
  • Activating ESU keys
  • Installing ESU
  • Maintaining ongoing ESU compliance

Original product version: Windows Server 2012 R2, Windows 7 Service Pack 1
Original KB number: 4547184

Installing ESU prerequisites

You may encounter the following issues when you install the ESU prerequisites.

The update is not applicable to your computer

When you install an update that is required by ESU, you see a message that resembles the following:

The update is not applicable to your computer.

Possible cause

The package that you're trying to install isn't applicable to your Windows operating system edition or architecture.

Actions to take

  • Make sure that the package is meant for your operating system edition and architecture.
  • Restart the computer, and then try to install the package again.​
  • If you still see the error message, see The update is not applicable to your computer in Windows Update troubleshooting to see a list of the most common reasons for this message.

Additional steps

If the preceding steps don't resolve the problem, do this on the affected computer:

  1. Copy the component-based servicing (CBS) log file (C:WindowsLogsCBSCBS.log).
  2. Contact Microsoft Support, and provide this log file.

Installer encountered an error: 0x80096010. The digital signature of the object did not verify

When you install an update that is required by ESU, you see a message that resembles the following:

Installer encountered an error: 0x80096010.
The digital signature of the object did not verify.

Possible cause

The computer is missing the SHA-2 updates.

Actions to take

Install the SHA-2 updates. For a list of prerequisites and SHA-2 updates, see the 'Installation prerequisites' section of Obtaining Extended Security Updates for eligible Windows devices.

Installing ESU product activation keys

You may encounter the following problems when you install a product activation key for ESU on a computer. This section assumes that all of the prerequisite updates for ESU are installed on the computer.

Run 'slui.exe 0x2a 0xC004F050' to display the error text. Error: 0xC004F050

When you install an ESU key, you see a message that resembles the following:

Run 'slui.exe 0x2a 0xC004F050' to display the error text.
Error: 0xC004F050

Possible causes

This problem may occur under any of the following conditions:

  • The licensing monthly rollup/security only/standalone package isn't installed on the computer.
  • The computer hasn't been restarted after installing the updates.
  • Windows Server 2008 SP2-based computers sometimes require an additional restart.

Actions to take

  1. Review the update history of the computer to make sure that all the ESU prerequisites have been installed successfully. For a list of the prerequisites, see Obtaining Extended Security Updates for eligible Windows devices.
  2. ​​Verify that the key that you're installing is the correct key for the computer and its operating system.
  3. Restart the computer, and then install the key again.​​

Additional steps

If the preceding steps don't resolve the problem, do this on the affected computer:

  1. Copy the component-based servicing (CBS) log file (C:WindowsLogsCBSCBS.log).
  2. Contact Microsoft Support, and provide this log file.

Error: 0xC004F050 The Software Licensing Service reports that the product key is invalid

When you install the ESU product key by using slmgr.vbs /ipk, you receive the following Windows Script Host message:

Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid.

Cause

This problem can occur in either of the following circumstances:

  • The licensing monthly rollup/security only/standalone package isn't installed on the computer.
  • You installed the prerequisite updates, but you didn't restart the computer.

Actions to take

  1. Check the computer's update history to make sure that all ESU prerequisite updates have been installed successfully.

For a list of the required updates and information about how to get them, see Obtaining Extended Security Updates for eligible Windows devices.2. Make sure that the key that you're installing is the correct key for the computer and its operating system.3. Restart the computer, and try again.

Additional steps

If the preceding steps don't resolve the problem, do this on the affected computer:

  1. Copy the component-based servicing (CBS) log file (C:WindowsLogsCBSCBS.log).
  2. Contact Microsoft Support, and provide this log file.

The Software Licensing Service reports that the product key is invalid

When you add the ESU product key to the Volume Activation Management Tool (VAMT), you receive the following message:

Unable to verify product key
The specified product key is invalid, or is unsupported by this version of VAMT. An update to support additional products may be available online.

Cause

This can occur if two of the files that support VAMT aren't updated to support ESU keys.

Resolution

To fix this problem, update the VAMT configuration files. To do this, follow these steps:

  1. Download the VAMT files. The download includes the following files:
    • pkconfig_win7.xrm-ms
    • pkconfig_vista.xrm-ms
  2. Copy the two downloaded files to C:Program Files (x86)Windows Kits10Assessment and Deployment KitVAMT3pkconfig, replacing the older versions of the files.
  3. Close VAMT, and then restart it.
Failed

The Software Licensing Service reports that the product key is invalid

When you use VAMT to install an ESU key on a computer, you receive the following Action Status message:

The Software Licensing Service reports that the product key is invalid

Cause

This can occur if the computer is missing the prerequisite updates that ESU requires.

Resolution

For a list of the required updates and information about how to get them, see Obtaining Extended Security Updates for eligible Windows devices.

Activating ESU keys

You may encounter the following problems when you activate the ESU key on a computer. This section assumes that the computer has the product activation key and all the prerequisite updates for ESU installed.

This section is divided into four parts. Some problems may occur during any type of activation, and some problems are specific to the activation type that your use.

Any activation method

Error: 0x80072F8F: Content decoding has failed

When you try to activate a Windows 7, Windows Server 2008, or Windows Server 2008 R2 ESU key, you receive the following error message:

0x80072F8F
147012721
WININET_E_DECODING_FAILED
Content decoding has failed

Cause

This may occur if TLS 1.0 is disabled and the HKEY_LOCAL_MACHINESystemCurrenteControlSetControlSecurityProvidersSchannelProtocolsTLS 1.0Client subkey is set as follows:

  • DisabledByDefault: 1
  • Enabled: 0Actions to take

This method forces the activation process to use TLS 1.2 by default so that TLS 1.0 can remain disabled.

To resolve this issue, follow these steps.

  1. If update 3140245 isn't installed on the computer, use Windows Update to install it.
  2. Open regedit, and navigate to the following registry subkey:HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionInternet SettingsWinHttp
    Create or set a REG_DWORD value of DefaultSecureProtocols, and set it to 0x800.
  3. If the computer is X64, you must also set the following additional registry key: HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftWindowsCurrentVersionInternet SettingsWinHttp
    Create or set a REG_DWORD value of DefaultSecureProtocols, and set it to 0x800.
  4. Restart the computer, and then try to run the slmgr.vbs /ato command again.

Slmgr activation

This section describes problems that you might encounter when you use the Slmgr tool for activation.

Product activation failed while trying to activate ESU product key

When you try to activate the product key, you get a message that resembles the following:

Error: Product activation failed.

Cause

The Windows operating system edition or architecture isn't eligible for ESU.

Actions to take

Make sure that the Windows operating system edition or architecture is in the list of editions and architectures that are supported for ESU. For a list, see Obtaining Extended Security Updates for eligible Windows devices.

Additional steps

If the preceding steps don't resolve the problem, contact Microsoft Support.

0xC004C020 the activation server reported that the Multiple Activation Key (MAK) has exceeded its limit

When you try to activate the product key, you get a message that resembles the following:

Product Activation Failed

0xC004C020 the activation server reported that the Multiple Activation Key has exceeded its limit

Cause

By design, a MAK supports a limited number of activations. In this case, the MAK has exceeded its activation limit.

Actions to take

To increase the number of activations that the MAK key supports, contact the Microsoft Licensing Activation Centers.

Product not found while trying to activate ESU key

When you activate the ESU product key, you receive a 'product not found' message.

Cause

The activation ID that you used in the activation command isn't correct.

Actions to take

To get the activation ID, follow these steps:

  1. Open an elevated Command Prompt window.
  2. Run the following command: cscript /h:cscript
  3. Run one of the following commands, depending on your version of Windows.
    • For Windows 7: slmgr /dlv
    • For Windows Server 2008 SP2: slmgr /dlv all
  4. In the command output, copy the activation ID of the ESU key.

To use the activation ID, run the following command: slmgr /ato <Activation ID>

Note

In this command, <Activation ID> represents the activation ID of the ESU key.

0xC004F025 access denied: the requested action requires elevated privileges

When you try to activate the product key, you receive a message that resembles the following:

0xC004F025 access denied: the requested action requires elevated privileges.

Possible Cause

You may be using a regular Command Prompt window instead of an elevated Command Prompt window.

Actions to take

To open an elevated Command Prompt window, do the following:

  • Select Start, right-click Command Prompt, and then select Run as administrator.

Error: 0x80072EE7

When you try to activate the product key, you receive a message that resembles the following:

On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0x80072EE7' to display the error text.
Error: 0x80072EE7

Cause

The computer can't communicate with the Microsoft Activation and Validation Services (AVS) server to activate the ESU key.

Actions to take

Make sure that the computer is connected to internet or has the Activation URLs white listed, and try again.

For computers that don't connect directly to the internet, you can use VAMT Proxy activation or Phone activation as an alternative. For more information, see Obtaining Extended Security Updates for eligible Windows devices.

For the current VAMT Proxy Activation URLs, see the 'Volume Activation Management Tool (VAMT) activation' section.

0x80072EE2 The operation timed out

When you try to activate the product key, you get a message that resembles the following:

0x80072EE2 The operation timed out

Possible causes

The computer can't connect to the Microsoft Activation service. It might not be connected to internet, or it might have issues with internet connectivity.

Actions to take

Make sure that the computer is connected to internet or has the Activation URLs white listed, and try again.

For computers that don't connect directly to the internet, you can use VAMT Proxy activation or Phone activation as an alternative. For more information, see Obtaining Extended Security Updates for eligible Windows devices.

For the current VAMT Proxy Activation URLs, see the 'Volume Activation Management Tool (VAMT) activation' section.

Activation command succeeds but the ESU key is still in Unlicensed state

You appear to have successfully activated the ESU key. However, the key still doesn't seem to be properly licensed.

Possible cause

The slmgr /ato command didn't correctly pass the ESU activation ID.

Action to take

To use the activation ID, run the following command: slmgr /ato <Activation ID>

Note

In this command, <Activation ID> represents the activation ID of the ESU key.

License Status: Unlicensed

Collapsible element body

Volume Activation Management Tool (VAMT) activation

This section describes problems that you might encounter when you use VAMT online or proxy activation. When you do this, use the following VAMT proxy activation URLs:

  • https://activation.sls.microsoft.com/BatchActivation/BatchActivation.asmx​

  • https://go.microsoft.com/fwlink/?LinkId=82160 (This FWLink redirects to the preceding URL.)​​Alternatively, include the following domains in the computer's allow list:

  • activation.sls.microsoft.com​

  • go.microsoft.com

Unable to verify product key

When you try to activate the product key, you get a message that resembles the following:

Unable to verify product key
The specified product key is invalid, or is unsupported by this version of VAMT. An update to support additional products may be available online.

Possible causes

There may be a problem in the pkconfig files. Those files may have to be replaced.

Actions to take

To update the VAMT configuration files, follow these steps:

  1. Download the VAMT files.

    The download includes the following files:

    • pkconfig_win7.xrm-ms
    • pkconfig_vista.xrm-ms
  2. Copy the two downloaded files into C:Program Files (x86)Windows Kits10Assessment and Deployment KitVAMT3pkconfig, replacing the older versions of the files.

  3. Close VAMT, and then restart it.

Unable to connect to the WMI service on the remote machine while activating the remote machine using VAMT online/proxy activation

When you try to activate the product key, you receive a message that resembles the following:

Unable to connect to the WMI service on the remote machine while activating the remote machine using VAMT online/proxy activation.

Possible causes

Office

Either of the following conditions on the affected computer may cause this problem:

  • The WMI (Windows Management Instrumentation) service isn't turned on.
  • Windows Firewall isn't configured correctly to allow VAMT access.

Actions to take

  • To turn on the WMI service, select Start > Services, and right-click Windows Management Instrumentation. Then select Restart​.
  • To configure Windows Firewall, follow the instructions in the Configure Client Computers topic.For more information about how to install the VAMT tool and configure client computers, see Install and Configure VAMT.

Error: Access is denied

When you try to activate the product key, you receive a message that resembles the following:

Error: Access is denied.

Possible Cause

You don't have permissions to access the computer.

Actions to take

On a domain-joined VAMT client computer, verify the following:

  1. You (or the activating user) have permissions to access the client computer.
  2. Your account (or that of the activating user) appears in the User Accounts list on the client computer. For more information, see Local Accounts.

Phone activation

This section describes problems that you might encounter when you use phone activation.

Error: 0xC004F04D The Software Licensing Service determined that the Installation ID (IID) or the Confirmation ID (CID) is invalid

When you try to activate the product key, you receive a message that resembles the following:

Run 'slui.exe 0x2a 0xC004F04D' to display the error text.
Error: 0xC004F04D

Possible Cause

The confirmation ID is incorrect.

Actions to take
  1. Call the Microsoft Licensing Activation Centers again. They'll walk you through the steps to get a confirmation ID.
  2. In an elevated Command Prompt window, run the following command: slmgr /atp <Confirmation ID> <ESU Activation ID>

Note

In this command, <Confirmation ID> represents the confirmation ID that you obtained in step 1, and <ESU Activation ID> represents the activation ID of the ESU product key.

Installing ESU

Product Activation Failed Office 2019

You may encounter the following problems when you install an ESU update on a computer. This section assumes that the computer has all of the prerequisite updates for ESU, and the product activation key is installed and activated.

The Windows Module Installer must be updated before you can install the package

When you install an ESU update, you see a message that resembles the following:

Windows Update Standalone Installer
The Windows Modules Installer must be updated before you can install this package. Please update the Windows Modules Installer on your computer, then retry Setup.

Possible cause

The Servicing Stack Update (SSU) with AI Changes package isn't installed on the computer.

Actions to take

Verify that the SSU package is installed on the computer. To do this, on the affected computer, select Start > Control Panel > Programs > Program and Features > View Installed updates.

If the SSU package isn't installed, install it and restart the computer. For more information about this update, see the 'Installation prerequisites' section of Obtaining Extended Security Updates for eligible Windows devices.

Additional steps

If the preceding steps don't resolve the problem, on the affected computer, copy the component-based servicing (CBS) log file (C:WindowsLogsCBSCBS.log). Contact Microsoft Support, and provide this log file.

Some updates were not installed while trying to install the security update

When you install an ESU update, you see a message that resembles the following:

Download and Install UpdatesSome updates were not installedFor information about other error codes, refer to the Windows Update error reference.

Possible causes

This problem may occur under any of the following conditions:

  • A valid ESU key isn't installed on the computer.​
  • In the case of a desktop client or server, the ESU key is installed but isn't activated.​
  • In the case of a Windows Embedded device, see Windows Embedded devices for possible causes.​
  • The Windows operating system that is installed on the computer isn't in the list of ESU supported editions or architectures. For a list of the supported editions and architectures, see Obtaining Extended Security Updates for eligible Windows devices.

Actions to take

In the case of a desktop client or server computer, follow these steps to verify that the computer has a valid ESU key installed and activated.

  1. Open an elevated Command Prompt window and then run one of the following commands:

    • slmgr /dlv (Windows 7 only)

    • slmgr /dlv <Activation ID>

      Note

      In this command, <Activation ID> represents the activation ID of the ESU key that is installed on the computer.

    • slmgr /dlv all

  2. In the command output, verify that ESU key is licensed.

    In the case of a typical (non-embedded) computer, install the ESU key if you haven't already done so, and then activate it by using one of the following methods:

    • Phone activation​
    • By using the slmgr /ato command. To do this, follow these steps:1. Open an elevated Command Prompt window.2. Run slmgr /ipk <ESU key> and wait for the success message.NoteIn this command, <ESU key> represents the ESU product key for the computer.
  3. Run slmgr /ato <Activation ID>.

In the case of Windows Embedded device, see Windows Embedded devices for appropriate actions to take.​

Additional steps

If the preceding steps don't resolve the problem, on the affected computer, copy the component-based servicing (CBS) log file (C:WindowsLogsCBSCBS.log). Contact Microsoft Support, and provide this log file.

Error: 80070643 - prep-check KB installation fails

When you install an ESU update, you see a message that resembles the following:

Error: 80070643 - prep-check KB installation fails

The message may reference one of the following:

  • KB 4528081 for Windows Server 2008 SP2
  • KB 4528069 for Windows 7 / Windows Server 2008R2

The CBS log may contain messages that resemble the following:

  • ESU: Product = 36 (0x00000024).
  • ESU: Is IMDS check needed: FALSE​
  • ESU: Pre IMDS checks failed, Not Eligible:HRESULT_FROM_WIN32(1605)

Possible causes

  • The operating system edition is not supported by the prep-check KB. The prep-check KB doesn't support *V or *Core editions.
  • The most recent Servicing Stack Update (February 11, 2020, or later) and Monthly Rollup update (February 11, 2020, or later) aren't installed on the computer.

Actions to take

Install the latest Servicing Stack Update (February 11, 2020, or later) and Monthly Rollup (February 11, 2020, or later), and then try again.

Windows Embedded devices

When you install ESU on a device that runs a Windows Embedded operating system, you may notice the following problems. ESU: NO ESU KEY FOUND

You have a device that has a Windows product key that falls within the range of keys that has been defined for embedded editions of Windows. When you install an ESU update, some of the updates don't install and the CBS log contains entries that resemble the following:

ESU: NO ESU KEY FOUND

For example, you see the following log entries.

Possible causes

The ESU product key isn't installed on the device.

Actions to take

Install a valid Windows Embedded ESU key on the computer, and then try to install the ESU package again.

HRESULT_FROM_WIN32(1633), Windows key in range of Windows Embedded keys

You have a device that has a Windows product key that falls within the range of keys that has been defined for embedded editions of Windows. When you install an ESU update, some of the updates don't install and the CBS log contains entries that resemble the following:

Product Activation Failed Excel

ESU: Windows is not activated.
ESU: not eligible:HRESULT_FROM_WIN32(1633)

For example, you see the following log entries.

Possible cause

Either the Windows product key or the ESU product key (or both) is installed on the device but isn't activated.

Actions to take

Activate the Windows product key or the ESU product key (or both) and try to install the ESU package.

HRESULT_FROM_WIN32(1633), Windows key out of range of Windows Embedded keys

You have a device that has a Windows product key that doesn't fall within the range of keys that has been defined for embedded editions of Windows. When you install an ESU update, some of the updates don't install and the CBS log contains entries that resemble the following:

ESU: Windows is not activated.
ESU: not eligible:HRESULT_FROM_WIN32(1633)

For example, you see the following log entries.

Product Activation Failed Bose

Possible cause

The ESU product key is installed on the computer but isn't activated.

Product Activation Failed Fix

Actions to take

Activate the ESU product key, and then try to install the ESU package again.

Maintaining ongoing ESU compliance

You notice a non-compliant device in your update management and compliance toolsets.

If you have a subset of devices that are running Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1 without ESU, you notice a non-compliant device in your update management and compliance toolsets.

Windows Server Update Service (WSUS) continues to scan cab files for Windows 7 SP1 and Windows Server 2008 R2 SP1.

More information

  • ​Lifecycle FAQ-Extended Security Updates